A3SS-XT14 High Pressure Coolant&Filtration Systems

Description

The Vacuum Belt Filter System is a filtering device that uses the negative pressure generated by the suction pump to accelerate the filter medium from the dirty liquid chamber to the clean liquid chamber. Compared with ordinary flat mesh paper belt filters and drum paper belt filters, this model has greater filtering capacity and better filtering effect,occupies a smaller area, and the filter belt can be recycled, saving the time of manual frequent replacement of the filter belt, and the cost of use is relatively ow, After the filtered filter residue is sucked dry by the negative pressure fan, the oil(water) content is greatly improved compared with ordinary paper belt filters, reducing the waste of cutting oil. At present, this model is widely used in the CNC machine tool industry, especially the high-precision grinding machine industry.

Typical application scenario

Suitable for metal precision grinding or other processing coolant/oil filtration, especially suitable for gear grindind machine, crankshaft, camshaft grinding machine, also suitable for other CNC finishing.

Main technical parameter and selection

1. Tank Volume                                                             1300L
2. Bulk Volume                                                              2700×1800×1600mm
3. Screw Pump Installation Method                          Vertical Type
4. Lift Pump Parameter                                               Flow 4m³/h  Lift 30m
5. Pressure Regulator Type                                        Two-position Three-way Valve / Plate Pressure Regulator / Proportional Valve
6. Filter Combination                                                   Circulating Filter
7. Filtration Accuracy                                                   50μm
8. Control Mode                                                           AKP Module / Integrated PLC